IEEE TRANSACTIONS ON
AUDIO, SPEECH, AND LANGUAGE PROCESSING
A PUBLICATION OF
THE IEEE SIGNAL PROCESSING SOCIETY
(Updated October 2012)
Information for Authors
The IEEE TRANSACTIONS ON AUDIO, SPEECH AND LANUGUAGE PROCESSING covers the sciences, technologies and applications relating to the analysis, coding, enhancement, recognition and synthesis of audio, music, speech and language. In particular, audio processing also covers auditory modeling, acoustic modeling and source separation. Speech processing also covers speech production and perception, adaptation, lexical modeling and speaker recognition. Language processing also covers spoken language understanding, translation, summarization, mining, general language modeling, as well as spoken dialog systems.
Authors are encouraged to submit manuscripts of Regular papers (papers which provide a complete disclosure of a technical premise), or Comment Correspondences (brief items that provide comment on a paper previously published in the TRANSACTIONS). Submissions/resubmissions must be previously unpublished and may not be under consideration elsewhere.
Every manuscript must (a) provide a clearly defined statement of the problem being addressed, (b) state why it is important to solve the problem, and (c) give an indication as to how the current solution fits into the history of the problem.
By submission of your manuscript to this Transactions, you are acknowledging that you accept the rules established for publication of manuscripts, including agreement to pay all overlength page charges, color charges, and any other charges and fees associated with publication of the manuscript. Such charges are not negotiable and cannot be suspended.
In order to be considered for review, a paper must be within the scope of the journal and represent a novel contribution. A paper is a candidate for an Immediate Rejection if it is of limited novelty, e.g. a straightforward combination of theories and algorithms that are well established and are repeated on a known scenario, no new experimental data or new application. Experimental contributions will be rejected without review if there is insufficient experimental data. The transactions are published in English. Papers that have a large number of typographical and/or grammatical errors will also be rejected without review.
New and revised manuscripts should be prepared following the "Manuscript Submission" guidelines below, and submitted to the online manuscript system, ScholarOne Manuscripts. After acceptance, finalized manuscripts should be prepared following the "Final Manuscript Submission Guidelines" below. Do not send original submissions or revisions directly to the Editor-in-Chief or Associate Editors; they will access your manuscript electronically via the Manuscript Central system.
Manuscript Submission. Please follow the next steps.
- Account in ScholarOne Manuscripts. If necessary, create an account in the on-line submission system ScholarOne Manuscripts. Please check first if you already have an existing account which is based on your e-mail address and may have been created for you when you reviewed or authored a previous paper.
- Electronic Manuscript. Prepare a PDF file containing your manuscript in double-column, single-spaced format
font size of 10 points or larger, having a margin of at least 1 inch on all
sides. For a regular paper, the manuscript may not exceed 13 double-column
pages, including title; names of authors and their complete contact information;
abstract; text; all images, figures and tables, appendices and proofs; and all references. Upload this version of the manuscript as a PDF file "double.pdf" to the ScholarOneManuscripts site. You are encouraged to also submit a single-column, double-spaced version (11 point font or larger), but page length restrictions will be determined by the double-column version.
For regular papers, the revised manuscript may not exceed 16 double-column pages (10 point font), including title; names of authors and their complete contact information; abstract; text; all images, figures and tables, appendices and proofs; and all references.
Proofread your submission, confirming that all figures and equations are visible in your document before you "SUBMIT" your manuscript. Proofreading is critical; once you submit your manuscript, the manuscript cannot be changed in any way. You may also submit your manuscript as a PostScript or MS Word file. The system has the capability of converting your files to PDF, however it is your responsibility to confirm that the conversion is correct and there are no font or graphics issues prior to completing the submission process.
- Additional Documents for Review. Please upload pdf versions of all items in the reference list which are not publicly available, such as unpublished (submitted) papers. Other materials for review such as supplementary tables and figures, may be uploaded as well. Reviewers will be able to view these files only if they have the appropriate software on their computers. Use short filenames without spaces or special characters. When the upload of each file is completed, you will be asked to provide a description of that file.
- Multimedia Materials. IEEE Xplore can publish multimedia files (audio, images, video) and Matlab code along with your paper. Alternatively, you can provide the links to such files in a README file that appears on Xplore along with your paper. For details, please see IEEE Author Digital Toolbox under "Multimedia." To make your work reproducible by others, the TRANSACTIONS encourages you to submit all files that can recreate the figures in your paper. Files that are to be included with the final paper must be uploaded for consideration in the review process.
- Submission. After uploading all files and proofreading them, submit your manuscript by clicking "Submit." A confirmation of the successful submission will open on screen containing the manuscript tracking number and will be followed with an e-mail confirmation to the corresponding and all contributing authors. Once you click "Submit," your manuscript cannot be changed in any way.
- Copyright Form and Consent Form. By policy, IEEE owns the copyright
to the technical contributions it publishes on behalf of the interests of the
IEEE, its authors, and their employers; and to facilitate the appropriate
reuse of this material by others. To comply with the IEEE copyright policies,
authors are required to sign and submit a completed "IEEE Copyright
and Consent Form" prior to publication by the IEEE.
The IEEE recommends authors to use an effective electronic copyright form (eCF) tool within the ScholarOne Manuscripts system. You will be redirected to the "IEEE Electronic Copyright Form" wizard at the end of your original submission; please simply sign the eCF by typing your name at the proper location and click on the "Submit" button.
Comment Correspondence. Comment Correspondences provide brief comments on material previously published in the TRANSACTIONS. These items may not exceed 2 pages in double-column, single spaced format, using 9 point type, with margins of 1 inch minimum on all sides, and including: title, names and contact information for authors, abstract, text, references, and an appropriate number of illustrations and/or tables. Correspondence items are submitted in the same way as regular manuscripts (see "Manuscript Submission" above for instructions).
Manuscript Length. Papers published on or after 1 January 2007 can now be up to 10 pages, and any paper in excess of 10 pages will be subject to over length page charges. The IEEE Signal Processing Society has determined that the standard manuscript length shall be no more than 10 published pages (double-column format, 10 point type) for a regular submission. Manuscripts that exceed these limits will incur mandatory over length page charges, as discussed below. Since changes recommended as a result of peer review may require additions to the manuscript, it is strongly recommended that you practice economy in preparing original submissions.
Exceptions to manuscript length requirements may, under extraordinary circumstances, be granted by the Editor-in-Chief. However, such exception does not obviate your requirement to pay any and all over length or additional charges that attach to the manuscript.
Resubmission of Previously Rejected Manuscripts. Authors of rejected manuscripts are allowed to resubmit their manuscripts only once. The Signal Processing Society strongly discourages resubmission of rejected manuscripts more than once. At the time of submission, you will be asked whether you consider your manuscript to be a new submission or a resubmission of an earlier rejected manuscript. If you choose to submit a new version of your manuscript, you will be asked to submit supporting documents identifying the previous submission number and detailing how your new version addresses all of the reviewers’ comments.
Full details of the resubmission process can be found in the Signal Processing Society "Policy and Procedures Manual".
Author Misconduct Policy: Plagiarism includes copying someone else’s work without appropriate credit, using someone else’s work without clear delineation of citation, and the uncited reuse of an authors previously published work that also involves other authors. Plagiarism is unacceptable.
Self-plagiarism involves the verbatim copying or reuse of an authors own prior work without appropriate citation; it is also unacceptable. Self-plagiarism includes duplicate submission of a single journal manuscript to two different journals, and submission of two different journal manuscripts which overlap substantially in language or technical contribution.
Authors may only submit original work that has not appeared elsewhere in a journal publication, nor is under review for another journal publication. Limited overlap with prior journal publications with a common author is allowed only if it is necessary for the readability of the paper. If authors have used their own previously published work as a basis for a new submission, they are required to cite the previous work and very briefly indicate how the new submission offers substantively novel contributions beyond those of the previously published work.
It is acceptable for conference papers to be used as the basis for a more fully developed journal submission. Still, authors are required to cite related prior work; the papers cannot be identical; and the journal publication must include novel aspects.
Author Misconduct Procedures: The procedures that will be used by the Signal Processing Society in the investigation of author misconduct allegations are described in the IEEE SPS Policies and Procedures Manual.
Author Misconduct Sanctions: The IEEE Signal Processing Society will apply the following sanctions in any case of plagiarism, or in cases of self-plagiarism that involve an overlap of more than 25% with another journal manuscript:
- immediate rejection of the manuscript in question;
- immediate withdrawal of all other submitted manuscripts by any of the authors, submitted to any of the Society’s publications (journals, conferences, workshops), except for manuscripts that also involve innocent co-authors; immediate withdrawal of all other submitted manuscripts by any of the authors, submitted to any of the Society’s publications (journals, conferences, workshops), except for manuscripts that also involve innocent co-authors;
- prohibition against each of the authors for any new submissions, either individually, in combination with the authors of the plagiarizing manuscript, or in combination with new co-authors, to all of the Society’s publications (journals, conferences, workshops). The prohibition shall continue for one year from notice of suspension.
Further, plagiarism and self-plagiarism may also be actionable by the IEEE under the rules of Member Conduct.
Authors are encouraged to prepare manuscripts employing the on-line style files developed by IEEE. All manuscripts accepted for publication will require the authors to make final submission employing these style files. The style files are available on the web at the IEEE Author Digital Toolbox under "Template for all Transactions." (LaTeX and MS Word).
Authors using LaTeX: the two PDF versions of the manuscript needed for submission can both be produced by the IEEEtran.cls style file. Adouble-spaced document is generated by including \documentclass[11pt,draftcls,onecolumn] (IEEEtran) as the first line of the manuscript source file, and a single-spaced double-column document for estimating the publication page charges via \documentclass[10pt,twocolumn,twoside] (IEEEtran) for a regular submission, or \documentclass[9pt,twocolumn,twoside] (IEEEtran) for a Correspondence item.
- Title page and abstract: The first page of the manuscript shall contain the
title, names and contact information for all authors (full mailing address, institutional
affiliations, phone, fax, and e-mail), the abstract, and the EDICS.
An asterisk * should be placed next to the name of the Corresponding Author
who will serve as the main point of contact for the manuscript during
the review and publication processes.
An abstract should have not more than 200 words for a regular paper, or 50 words for a Correspondence item. The abstract should indicate the scope of the paper or Correspondence, and summarize the author’s conclusions. This will make the abstract, by itself, a useful tool for information retrieval.
- EDICS: All submissions must be classified by the author with an EDICS (Editors’ Information Classification Scheme) selected from the list of EDICS published online at the SPS website's TASLP EDICS page.
- NOTE: EDICS are necessary to begin the peer review process. Upon submission of a new manuscript, please choose the EDICS categories that best suit your manuscript. Failure to do so will likely result in a delay of the peer review process.
- The EDICS category should appear on the first page—i.e., the title and abstract page—of the manuscript.
- Illustrations and tables: Each figure and table should have a caption that is
intelligible without requiring reference to the text. Illustrations/tables may
be worked into the text of a newly-submitted manuscript, or placed at the
end of the manuscript. (However, for the final submission, illustrations/
tables must be submitted separately and not interwoven with the text.)
Illustrations in color may be used but, unless the final publishing will be in color, the author is responsible that the corresponding grayscale figure is understandable.
In preparing your illustrations, note that in the printing process, most illustrations are reduced to single-column width to conserve space. This may result in as much as a 4:1 reduction from the original. Therefore, make sure that all words are in a type size that will reduce to a minimum of 9 points or 3/16 inch high in the printed version. Only the major grid lines on graphs should be indicated.
- Abbreviations: This TRANSACTIONS follows the practices of the IEEE on units and abbreviations, as outlined in the Institute’s published standards. See IEEE Information for Authors for details.
- Mathematics: All mathematical expressions must be legible. Do not give derivations that are easily found in the literature; merely cite the reference.
- Bibliography: IEEE SPS publications are expected to reference related work to put new work in context, to give credit to foundational work, and to provide details associated with components that have previously appeared in the literature. It may be useful to cite early work (often conference papers) to credit particular authors for ideas, but later expanded versions published as journal papers are often more useful for the reader who wants to duplicate results because of refinements due to further work and the peer review process. Authors are encouraged to cite the most relevant work for their study. To aid authors in identifying related publications, we have collected data in making connections between the already published T-ASLP papers and their conference paper origins in http://eeeweba.ntu.edu.sg/DSPLab/Publication/EEE_TASLP.htm, which is frequently updated.
Final Manuscript Submission Guidelines.
Upon formal acceptance of a manuscript for publication, instructions for providing the final materials required for publication will be sent to the Corresponding Author. Finalized manuscripts should be prepared in LaTeX or MS Word, and are required to use the style files established by IEEE, available at IEEE Author Digital Toolbox.
Instructions for preparing files for electronic submission are as follows:
- Files must be self-contained; that is, there can be no pointers to your system setup.
- Include a header to identify the name of the TRANSACTIONS, the name of the author, and the software used to format the manuscript.
- Do not import graphics files into the text file of your finalized manuscript (although this is acceptable for your initial submission). If submitting on disk, use a separate disk for graphics files.
- Do not create special macros.
- Do not send PostScript files of the text.
- File names should be lower case.
- Graphics files should be separate from the text, and not contain the caption text, but include callouts like "(a)," "(b)."
- Graphics file names should be lower case and named fig1.eps, fig2.tif, etc.
- Supported graphics types are EPS, PS, TIFF, or graphics created usingWord, Powerpoint, Excel or PDF. Not acceptable is GIF, JPEG,WMF, PNG,BMP or any other format (JPEG is accepted for author photographs only). The provided resolution needs to be at least 600 dpi (400 dpi for color).
- Please indicate explicitly if certain illustrations should be printed in color; note that this will be at the expense of the author. Without other indications, color graphics will appear in color in the online version, but will be converted to grayscale in the print version.
Additional instructions for preparing, verifying the quality, and submitting graphics and multimedia files are available via IEEE Author Digital Toolbox.
The publication is a hybrid journal, allowing either Traditional manuscript submission or Open Access (author-pays OA) manuscript submission. Upon submission, if you choose to have your manuscript be an Open Access article, you commit to pay the discounted $1,750 OA fee if your manuscript is accepted for publication in order to enable unrestricted public access. Any other application charges (such as overlength page charge and/or charge for the use of color in the print format) will be billed separately once the manuscript formatting is complete but prior to the publication. If you would like your manuscript to be a Traditional submission, your article will be available to qualified subscribers and purchasers via IEEE Xplore. No OA payment is required for Traditional submission.
Voluntary Page Charges. Upon acceptance of a manuscript for publication, the author(s) or his/her/their company or institution will be asked to pay a charge of $110 per page to cover part of the cost of publication of the first ten pages that comprise the standard length (six pages, in the case of Correspondences).
Mandatory Page Charges. The author(s) or his/her/their company or institution will be billed $220 per each page in excess of the first ten published pages for regular papers and six published pages for correspondence items. These are mandatory page charges and the author(s) will be held responsible for them. They are not negotiable or voluntary. The author(s) signifies his willingness to pay these charges simply by submitting his/her/their manuscript to the TRANSACTIONS. The Publisher holds the right to withhold publication under any circumstance, as well as publication of the current or future submissions of authors who have outstanding mandatory page charge debt.
Color Charges. Color figures which appear in color only in the electronic (Xplore) version can be used free of charge. In this case, the figure will be printed in the hardcopy version in grayscale, and the author is responsible that the corresponding grayscale figure is intelligible. Color reproduction in print is expensive, and all charges for color are the responsibility of the author. The estimated costs are as follows. There will be a charge of $62.50 for each figure; this charge may be subject to change without notification. In addition, there are printing preparation charges which may be estimated as follows: color reproductions on four or fewer pages of the manuscript: a total of approximately $1045; color reproductions on five pages through eight pages: a total of approximately $2090; color reproductions on nine through 12 pages: a total of approximately $3135, and so on. Payment of fees on color reproduction is not negotiable or voluntary, and the author’s agreement to publish the manuscript in the TRANSACTIONS is considered acceptance of this requirement.